This high-capacity external lithium battery pack is compact, yet packs a whopping amount of power. At only 4.84" wide, 8.93" long and 0.87" thick, it''s compact enough to slip into a side pocket in the cockpit, Includes an electronic battery level indicator, AC charger (will reach full charge in 4-5 hours), and 6-foot cable with 2.35mm tip. L-ION technology means no memory effect. Voltage output: 15V-21V.

Approximate Battery Life
XRX (450 mA): 14 hours
MRX (100 mA): 60 hours

Additional Information

This high-capacity external lithium battery pack is small and compact, yet loaded with features. At only 6.25" W x 3.5" H x 0.75" D, it's compact enough to go anywhere, yet packs enough power for either XRX or MRX for multiple flights. Includes an electronic battery level indicator, handsome case, AC charger (will reach full charge in 3-4 hours), standard 3' cable and a separate 3' extender cable, and a wide assortment of tips for use with virtually any portable device (including the required 2.35mm tip for MRX/XRX).

Approximate Battery Life
XRX (450 mA): 9.5 hours
MRX (100 mA): 40+ hours

Voltage output: 9/12V selectable (12V recommended with XRX)

For MRX Only. The perfect answer to remote-mounting your MRX antenna, or if you do not want to permanently mount a dedicated antenna on the outside of your aircraft. The antenna extender is a 9* ft. super-thin RG-174 coaxial cable with a female Reverse-SMA connector and suction cup mounts on one end, and a male right-angle Reverse-SMA connector on the other.

The extender is connected to the antenna connection on your unit, and the cable is routed to a side window or other unobtrusive location. The stub antenna that came with your unit is placed on the end of the extender (antenna not included with extender).

*Can be made to the length you need (max 10') at no additional charge. Call us with the length you need, or order online for the standard 9' length.

This custom audio cable is 100% compatible with all Bose 6-pin connector headsets, including noise reduction circuitry, and is stereo compatible. One simple cable is all you need! Replaces standard headset audio cable. 6-foot straight cable into Y.

XRX Only. Hear your headset-capable PCAS system with any single-connector-style helicopter (U174) intercom system. One simple cable hookup replaces standard headset audio cable. Mono compatible. 6-foot coiled cable into Y.

Originally developed as an alternative to slow blow fuses, the trip free 7277 is used extensively as primary electrical circuit protection on general aviation aircraft.

Download Spec Sheet (PDF/423K)

Comant CI-105 blade-style antenna. A very rugged antenna which is encased in glass reinforced molded shell. Includes a BNC connector and is rated to 400 kts. TAS. Height. 3.25". Two antennas required for a dual antenna setup.

Download Spec Sheet (PDF/369K)

MRX Only. Contains: two 15' coax (RG174) cables with BNC connectors, one antenna splitter with gain adaptor, and one 5' coax (RG174) cable with BNC and R/A RevSMA connectors.

Does not include antennas (available separately). For use in conjunction with the MRXIH-I Hardware kit and two blade-style antennas (P/N 21006001-I).

MRX only. Custom metal mounting sleeve with hardware, power cable and installation guide. Includes everything needed to mount an MRX unit (not included) in instrument panel. Does not include antenna harness or antenna (available separately).

MRX Only. Contains: 15' coax (RG174) cable with BNC and R/A RevSMA connectors, and one gain adaptor.

Does not include antenna (available separately). For use in conjunction with the MRXIH-I Hardware kit and one blade-style antenna (P/N 21006001-I).

Additional cable for MRX/XRX. For installing your unit in multiple aircraft, each with it's own power lead. Right-angle 0.7mm plug, 6 foot 24 AWG cable, tinned leads.

No space on the glareshield? Try our RAM solution. Detachable twist lock suction cup with double socket 5" arm and attachment plate. Cup will solidly adhere to any glass or smooth non porous surface. Excellent solution for rental airplanes. Geniune RAM Mount product, designed specifically for PCAS systems.

Includes super-sticky pad and Velcro coin for permanent or removable attachment of PCAS unit.

Get XRX traffic on your Garmin 396 or 496! This cable allows XRX-generated traffic to appear on the Garmin screen similar to the way TIS traffic appears. This simple cable powers both the Garmin unit and the XRX unit from one cigarette plug. From a central "Y" point, generous cabling allows 68" to the cigarette plug, 48" to the Garmin, and 68" to the XRX unit. Uses a single lightweight cable for both power and data transmission.


System Requirements:

• Garmin 396 or 496 with firmware 2.90 or higher, available as a download from Garmin
• PCAS XRX with firmware 2.0 or higher (available from Zaon)

Connector cable for Garmin GPSMAP 396 and 496, terminates in bare wires. Suitable for connecting power, audio, and serial data (in and out) to Garmin unit. Includes fused power lead. 5' cable length. Garmin P/N 010-10513-00.

Note: does not include XRX connector. Use GARX-X to interface XRX with 396/496.

Get XRX traffic on your Garmin 695 or 696! This cable allows XRX-generated traffic to appear on the Garmin screen similar to the way TIS traffic appears. This simple cable powers both the Garmin unit and the XRX unit from one cigarette plug. From a central "Y" point, generous cabling allows 68" to the cigarette plug, 48" to the Garmin, and 68" to the XRX unit. Uses a single lightweight cable for both power and data transmission.

Get XRX traffic on your Garmin Aera 795 or 796! This cable allows XRX-generated traffic to appear on the Garmin screen similar to the way TIS traffic appears. This simple cable powers both the Garmin unit and the XRX unit from one cigarette plug. From a central "Y" point, generous cabling allows 68" to the cigarette plug, 48" to the Garmin, and 68" to the XRX unit. Uses a single lightweight cable for both power and data transmission.

Does not have an in-line audio jack, which means you will not be able to connect to your audio panel or headset, and will not be able to listen to your XM radio or hear audio traffic and/or terrain warnings. We're currently working on a solution for this issue, and will post an update on our website as soon as a cable with audio jack is available. Audio out with traffic warnings directly from the XRX will remain available.

Get XRX traffic on your Garmin Aera 500 Series model! This cable allows XRX-generated traffic to appear on the Garmin screen similar to the way TIS traffic appears. This simple cable powers both the Garmin unit and the XRX unit from one cigarette plug. From a central "Y" point, generous cabling allows 68" to the cigarette plug, 48" to the Garmin, and 68" to the XRX unit. Uses a single lightweight cable for both power and data transmission.


System Requirements:

• Garmin Garmin Area series are out of the box compatible with the XRX
• PCAS XRX with firmware 2.0 or higher (available from Zaon)

Get XRX traffic hardwired into your third-party moving map system. This single lightweight cable provides hookup to both the data port (DB9) and the power jack on the XRX. The other end of the 68" cable has tinned leads ready for hookup directly into your third-party system. Uses a single lightweight cable for both power and data transmission.



See integration website for more information.

Make your XRX Bluetooth-enabled. Transmit traffic information wirelessly to your Bluetooth-enabled device, such as a PDA or Tablet computer. Made to work with AnywhereMap software (requires free upgrade, available from ControlVision).

Tiny, self-powered device measures 1.25" W x 1.85" D x 0.65" H and connects directly to the XRX via the serial port.