Zaon Forums
Welcome, Guest
Please Login or Register.    Lost Password?
Detecting landing or takeoff traffic (1 viewing) (1) Guests
Go to bottom Post Reply Favoured: 0
TOPIC: Detecting landing or takeoff traffic
#89
faq (User)
Senior Boarder
Posts: 40
graphgraph
User Offline Click here to see the profile of this user
Detecting landing or takeoff traffic 4 Years, 8 Months ago Karma: 1  
PCAS occaisionally does not show or drops aircraft that are taking off or landing.

Close to the ground, the transponder interrogation is usually obstructed by ground clutter such as buildings, tress, hangars, etc. If no primary RADAR is located on the airfield, typically RADAR coverage begins 500-800 feet or more above the airport. Without RADAR interrogations, transponders may not reply, leaving PCAS with no signal to detect.

It is important to note: that a typical airport environment in the US has at least one SSR or Enroute RADAR facility. Also, PCAS is a dual-environment detection system, meaning TCAS-equipped aircraft, or aircraft with an active collision avoidance system aboard, will also interrogate. These areas of limited ground coverage are not common, or do not display this situation all of the time.
 
Report to moderator   Logged Logged  
  The administrator has disabled public write access.
      Topics Author Date
    thread link
Detecting landing or takeoff traffic
faq 2007/09/13 09:24
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop

Related Items