See what you've been missing! Get traffic information on your VistaNav system straight from your XRX. Zaon and VistaNav have teamed up to provide highly-accurate traffic information directly on the screen of your Motion tablet based system.

Hooking up an XRX to your VistaNav system is simple and easy to send XRX traffic to the Motion tablet via a simple serial cable. The VistaNav system even auto-senses the XRX for painless, wireless hookup. 

What you see

3D Traffic... An Industry First! VistaNav is the first moving map system to give true three-dimensional information complete with traffic. A 3D wireframe box represents the traffic information coming from the XRX. The box changes color based on the threat level, from white to yellow to red. You can also choose a 2D view with traffic represented as blocks positioned on rings around your aircraft. The traffic's relative altitude is also displayed next to the traffic icon. For example, an aircraft 400 feet above would be displayed as +04. The climb or descend trend is also displayed as either an up or down arrow.

VistaNav & Zaon: All you need

VistaNav Overview VistaNav and Zaon have put together a video to better describe the experience of flying with XRX collision avoidance and the VistaNav synthetic vision system. Join VistaNav Product Line Manager Jeff Simon as he takes on a guided tour of the VistaNav and Zaon systems.

VistaNav & Zaon Win Industry Award  Advanced Imaging's 2007 Imaging Solutions of the Year For the eleventh year, Advanced Imaging presents its Solutions of the Year. And what a good year 2006 was for solving involved problems using sophisticated imaging technology. VistaNav and Zaon were presented with the solution of the year award for the category of Consumer & Commercial. Click the link above for the complete article.

Minimum Requirements

The minimum requirements are needed to show traffic:

• XRX with any version of software
• VistaNav software

For more infromation on VistaNav products, visit their website at www.vistanav.com.

Setup Guide

XRX Step-by-Step Setup

1. To get the best performance, ensure all interface cables are properly connected and XRX is positioned  for maximum detection. See “Placement Considerations” in your XRX Owner’s Manual.
2. Calibrate your XRX compass. See “Compass Calibration” in your XRX Owner’s Manual.
3. Use the Com menu to select “fProfile 1” as the output method.

Maximize Detection Window

1. Using the Alt and Range menus to set detection range to 6NM and altitude to ±2500 feet
2. Press mute to return to the traffic screen. The screen will only show “Profile 1”, but all menu options will still be available by pressing the menu button again at any time.

VistaNav Setup

1. Setup is almost completely automatic. With the XRX set up as above and the unit turned on, the VistaNav software will autodetect the unit and start processing traffic information.

Must-Read Information

Please read the important general important guidelines to help you get the best performance from your XRX investment.

Portions of this information, including images, may be held under copyright by the third party, Mercury Computer Systems, Inc. and are subject to change without notice.